PROJECT WORKSPACE
Start or continue a project
Create a project from a measurement, return to a saved project, or import a portable project file. Reference import and design administration remain available inside the opened project.
Create
Start a new project from JSON or TXT measurement data.
Open
Continue work on a saved project.
Import
Restore a portable Gleisbild project file.
Generate test track
Create a project from a simulated survey of a known track. Download the true design to compare your result with.
QUICK START & HELP
Gleisbild — Quick start & help
Gleisbild turns an imported measurement trace into an editable horizontal, superelevation, and vertical design. Start with a demo when you want to learn the workflow without using your own data.
Start safelyCreate, restore, or try a demo
Create a new Project
Press the button New project to choose a track measurement from your local disk. The algorithms have been tested and optimized for a 1 m or 3–4 ft measurement interval. Gleisbild supports two different formats:
- JSON: As exported from Amberg Rail
- TXT: Tab-delimited text file. Format:
Stationing Easting Northing Height Superelevation- Superelevation is optional.
- Expected units are Meter or Feet (int). When importing a TXT file, you will be asked to define the units used.
- After the interval data, an optional marker section can follow:
Stationing Text
Open an existing project
Press the button Open project and choose your project from a list, or choose it from the Recent projects list.
Import an existing project
Import a project that was exported earlier from Gleisbild. Press the button Import project and choose the file from your local disk.
Open a demo project
If you are new to Gleisbild, open one of the two provided demo projects. Press Create demo copy to explore Gleisbild’s possibilities.
Generate a test track
Under Generate test track, choose a track and a seed, then press Create test project. The measurement is a simulated survey of a known design, so you can check a result exactly: Download true design saves the true elements as LandXML (to import as a reference) and as JSON. The same seed always gives the same survey; a different seed gives new survey noise. Random track builds a new realistic track for each seed.
Review the traceInspect measurement and reference evidence
LandXML reference
Import LandXML reference in Project settings when you plan to have your new design seamlessly continue from the end of the LandXML reference.
Refining elements
Inspect curvature, markers, and superelevation. Use Suggest boundaries as a starting point. If needed, Detection tolerances can be adjusted in Detection settings.
Refine the detected elements in the Measured curvature graph so they represent the railway geometry.
- Zoom in/out. Use the mouse wheel in a graph.
- Drag zoom area. Click and drag in the curvature graph, then drag horizontally.
- Select element. This highlights the selected element in the Editable elements list. The list contains all declared elements; keeping visible elements at
1is recommended. - Split element. Double-click an element in the curvature graph to split it into two elements.
- Adjust boundaries. Click and drag an element boundary to better fit a curvature change.
- Change element type. Select an element, then change its type in the declared element list (
…): Blue = straight lines; Red = arcs; Yellow = clothoids. - Delete element. Select an element, then delete it in the declared element list.
- Merge element. Select an element, then merge it with the next element in the declared element list (
…).
Inspect straightness
Straight lines can appear straight while still containing kinks or very large radii. To check straightness, activate Inspect straightness. Click and drag from the beginning to the end of a straight. The dialogue shows the measurement residuals to the straight line between those points.
Fit deliberatelyPreview, Final fit, and fixed-boundary checks
It is recommended to start with a free fit. Do not use constraints at first: the free fit shows what fit quality can be achieved. Adding constraints later can only worsen the overall fit quality.
Fit fixed boundaries
Fit fixed boundaries is a diagnostic: it keeps every declared element boundary exactly where it is. It tests whether the current sequence of element types and curvatures can explain the measurement without moving the boundaries. It answers: “Is my current segmentation already plausible?”
Fit declared elements — Preview
Fit declared elements — Preview is a fast, approximate optimisation. It starts from the declared geometry, allows boundaries to move within the configured tolerance, but uses reduced sampling and a limited search. It gives a quick candidate, not necessarily the best result. It answers: “Can the declared design be improved quickly?”
Fit declared elements — Final fit
Fit declared elements — Final fit performs the full optimisation of your declared design.
It uses all configured constraints and may adjust:
- Internal element boundaries, within the boundary tolerance
- Curvatures or radii of editable elements
- The fitted start pose, subject to endpoint controls
- Imported-reference anchor constraints, when enabled
It validates the result against all measurements and uses the more thorough boundary search when needed. Use it when the declared sequence is credible and you want the best practical result before accepting it.
Judge, then acceptUse residuals and diagnostics together
Read residuals and element diagnostics, not RMS alone. Inspect boundary flags and outlier review; a sustained deviation can indicate geometry, not bad measurement data.
Build the complete designLink horizontal, superelevation, and vertical
After accepting horizontal geometry, review the linked superelevation and vertical definitions. Their scopes can be managed independently where an imported reference is available.
Report and exportReview results and create deliverables
Use Results / Exports for read-only graphs, definitions, residual tables, project backup, LandXML, and configurable TXT output.
Best practices
- Use meaningful element types: keep real large-radius arcs as arcs rather than changing them to lines.
- Lock a length or radius only when it is an intentional engineering constraint.
- Try an unanchored fit before an imported-reference anchor when comparing measurement and reference quality.
- Use robust outlier handling for isolated spikes only; clusters and boundary flags deserve engineering review.
- Export a portable project before major experimentation or when working on an ephemeral hosted preview.
CURRENT PROJECT
Project
Edit the active design, fit it to the measurement, and review the result before accepting it.
02 · Curvature review
Measured curvature
Showing declared elements (editable in Section 03).
Imported superelevation · linear difference over 1.5 m base
Curvature is derived from the Easting/Northing coordinate trace; the imported radius is ignored. Blue = straight (near zero); red = stable non-zero curvature / arc; yellow = changing curvature / clothoid. Candidate ranges are smoothed and consolidated to the minimum element length.
03 · Segmentation
Editable elements
Define the geometry sequence. The first start and final end may be anywhere within the measured stationing range; fitting uses only measurements inside that declared scope.
Constraints: 0 locked lengths, 0 locked arc radii, 0 paired transitions.
04 · Fit and review
Plan & residuals
Measured curvature (teal) and fitted design curvature (red) · resulting design elements: blue = straight, red = arc, yellow = clothoid
Cross-track residual · resulting design elements: blue = straight, red = arc, yellow = clothoid
⚙ Outlier detectionRun a fit to analyse residual quality.
Run a fit to calculate robust residual candidates. This review never changes the measurement or the fit.
| Station / range | Cross-track range | Max robust score | Classification | Interpretation |
|---|---|---|---|---|
| No current horizontal fit. | ||||
This review is diagnostic only. It does not down-weight, exclude, or alter any measurement.
05 · Horizontal diagnostics
Element diagnostics
No current fitted alignment
| # | Type | Start | End | Length | Start R | End R | RMS cross-track | RMS along-track | RMS azimuth | Flags |
|---|---|---|---|---|---|---|---|---|---|---|
| No fitted alignment. | ||||||||||
06 · Superelevation
Suggested design superelevation
Measured superelevation from imported tilt · design: No SE / Constant SE / Linear SE ramp
Normalized correction · positive = make superelevation steeper; negative = make it flatter
Boundaries are inherited from the current horizontal alignment. The initial suggestion uses 0 mm for straight elements, rounded average values for arcs, and continuous linear ramps through transitions.
07 · Vertical alignment
Suggested vertical design
Measured elevation and editable design · violet dashed = measurement-aligned imported vertical reference · fitting and correction use the declared scope · gradient labels are shown in ‰ · yellow areas are circular vertical curves
Vertical correction · positive = lift; negative = lowering would be required · violet dashed = measurement-aligned imported vertical reference
Select a point in the graph or an entry below. The first and last points define the scope and cannot have a circular rounding.
Scroll in the plot to zoom stationing. Scroll near the left elevation axis to zoom vertically. Force range is a deliberate one-time action: it adds tangent intersections only where needed to keep sampled corrections within the requested lift range. Regenerate suggestion returns to the ordinary estimated profile.
RESULTS / EXPORTS
Current project report
Open a project to review its current results.
ExportsPortable project, LandXML, and TXT output
DefinitionsRead-only accepted geometry and design definitions
Horizontal definition
| # | Type | Start | End | Length | Start R | End R | Constraints |
|---|---|---|---|---|---|---|---|
| No current horizontal definition. | |||||||
Superelevation definition
| # | Type | Start | End | Start SE | End SE |
|---|---|---|---|---|---|
| No current superelevation definition. | |||||
Vertical definition
| # | Station | Elevation | Slope out | Circular | Radius |
|---|---|---|---|---|---|
| No current vertical definition. | |||||
ResidualsMeasured deviations from the current design
Horizontal residuals per element
| # | Type | RMS cross-track | RMS along-track | RMS azimuth | Flags |
|---|---|---|---|---|---|
| No current horizontal residuals. | |||||
Residuals per measurement
Horizontal, superelevation, and vertical deviations at measured samples.
| Station | Horizontal cross-track | Horizontal along-track | Superelevation correction | Vertical correction |
|---|---|---|---|---|
| No current project. | ||||
Report charts are read-only. Scroll to zoom stationing; drag a selected range to zoom, or drag a zoomed view to pan. All report charts share the same stationing range.
PROJECT SETTINGS
Manage current project
Open a project to manage its settings.
